Preparing for a Sewer Inspection: A Plumber’s Guide


Do you serve the public as a plumber? Have you ever worked with sewer systems?

Every plumber needs to know some principles if they’ll work with sewer and septic systems. Those systems can become contaminated if the regulations aren’t observed. If a plumber fails to pay close attention to legalities, their clients can suffer.

Sewer inspection is one of the tools used to ensure compliance. This article will review some tricks and plumbing tools to make sure you’re well-prepared.

Let’s get started!

Wear Protective Clothing and Respirators

When inspecting and cleaning sewers, you must wear protective clothing and respirators. Protective clothing consists of protective boots, goggles, overalls, and gloves. Gloves must cover the length of your arm to provide better protection against germs and bacteria.

Respirators are a must to protect against any airborne contaminants, such as germs and gasses which can cause health problems. It is important to select a respirator that fits well and provides proper coverage against the environment within the pipe. During preparation, inspect all of your equipment to ensure it is functioning properly and is in good condition.

Make sure you have the right tools such as clamps, wrenches, brushes, cleaning agents, etc. to do the job. Inspecting and cleaning sewers is a potentially hazardous job, so it is important to take the necessary steps to protect yourself. 

Clear Out Any Obstructions

When preparing for a sewer inspection, it is important to clear out any obstructions to ensure that the inspection goes off without a hitch. First, check for clogs or blockages within the sewer pipes. If blockages are found, they should be cleared using a sewer snake or special chemical cleaner.

If the pipes are in good condition, you should then clean the pipe by using a power washing machine or a steam cleaner. After cleaning, the plumber should thread the sewer inspection camera on the line and inspect the interior of the pipe. 

Invest in Inspection Cameras

Investing in inspection cameras from Haaker Equipment Company for preparing for a sewer inspection is a wise move that will provide long-lasting benefits.

Inspection cameras can precisely inspect the interior of your sewage lines, providing a clear overview of any obstructions, wear and tear, or damage. 

You can learn more about Envirosight here, as they offer a range of cameras, from simple low-cost options all the way up to more comprehensive range systems.

Keep the Site Hygienic and Disinfect the Surrounding Area

It is important to keep the work site clean and hygienic when performing a sewer inspection. Tools and equipment should be disinfected before and after use. Also, the area surrounding the sewer by using a solution of bleach and water or a suitable cleaning product.

All surfaces that will be in contact with the plumber and the tools should be sanitized before beginning the inspection. Next, the plumber should fill any holes or gaps that may be present in the vicinity with cement, to avoid the entry of any pests. 

Preparations Guarantee a Precise Sewer Inspection

A precise sewer inspection can help avoid disaster. With the right preparations, a plumber can detect and fix any issues. To ensure the best results, plumbers should have all the necessary equipment and materials, adhere to safety protocols, and allow adequate time for teamwork. 

If you find this article helpful and want to read more great content, check out our other blogs today!

You may also like

Leave a reply

Your email address will not be published. Required fields are marked *

More in Maintenance